This page describes the subtitle file interface use in Automation 4 Lua scripts to manipulate subtitle files.

There is one special object (the subtitles user data object) which has a number of functions, and a number of table formats defined.

The subtitles object

Most Automation 4 Lua feature functions are passed a subtitles object when called. This object is used to obtain data from and manipulate the subtitles the feature is being applied on.

A subtitles object can have two special properties depending on the context it is created for:

Read-only
Some feature functions must not be allowed to modify the subtitle file at all. This includes for example macro validation functions and export filter configuration panel providers, because this would be outside user expectations.
Allow undo points
Only macro processing functions can set undo points, as it makes no sense to do so at any other time.

To allow the most flexibility, the subtitles object represents a complete ASS format file, line by line, including all meta-lines such as section headers.

The subtitles object supports the following operations:

  • Retrieve number of lines
  • Read line
  • Append line (to end of file)
  • Insert line (at arbitrary position in file)
  • Replace line
  • Delete line
  • Create undo point

These operations are described in detail below. In all operation synopses and examples, subtitles is used for name of the subtitles object being operated on.

Retrieve number of lines

Synopsis:

  • num_lines = #subtitles
  • num_lines = subtitles.n

This operation retrieves the total number of lines in the subtitle file currently. This number only changes by using the other operations on the subtitle object. It cannot change spontaneously during the execution of a script.

Note that this is not a constant-time lookup, but lua does cache the value if used in for i = 1, #subs.

num_lines (number)
Number of lines in the subtitle file.

The first syntax is the preferred one, per normal Lua 5.1 coding style.

Read line

Synopsis: line = subtitles[i]

This retrieves the indexed line and creates a new table object with data about it.

line (table)
Table with data about the retrieved line.
i (number)
Index into the subtitles file of the line number to retrieve. This is one-based, i.e. the first line in the file has index 1.

Aegisub internally stores the subtitle file as a linked list, which means that random access is slow, but sequential access is fast. While Automation 4 Lua presents the subtitles as if it was an array, it internally maintains a cursor used to optimise for sequential access. It is faster to access a line with an index close to the one you last accessed than to access one further away. It is always fast to access lines near the beginning or end of the file.

Append line

Synopsis:

  • subtitles[0] = line
  • subtitles.append(line)
  • subtitles.append(line1, line2, ...)

Append one or more lines to the end of the appropriate section of the subtitles file. If the section does not exist, it will be created. In the first syntax, it is the number 0 (zero) used for index. (Setting index 0 causes an append operation.)

The third syntax supports appending multiple lines with one single operation.

line (table)
The line object table to append to the subtitles file.

The latter function-call syntax is preferred for readability. The table index setting syntax is slightly faster.

Appending a line does not move the cursor otherwise used to optimise sequential access.

Insert line

Synopsis:

  • subtitles[-i] = line
  • subtitles.insert(i, line)
  • subtitles.insert(i, line1, line2, ...)

Inserts one or more lines into the subtitles file before the numbered line. In the first syntax, you supply a negative index. E.g. to insert a line before line 5 you supply index -5 (negative 5.)

Inserting lines will move lines after the inserted lines to move down in index, such that old indexes will no longer be valid.

Inserting lines into the wrong section of the subtitle file has undefined results, and may break in weird ways.

i (number)
Index to insert before.
line (table)
The line object table to insert into the subtitles file.

The latter function-call syntax is preferred for readability. The table index setting syntax is slightly faster.

Inserting lines uses the list cursor and will move it.

Replace line

Synopsis: subtitles[i] = line

Delete the indexed line and insert the given line in its stead.

i (number)
The line index to replace at.
line (table)
The line object table to replace with.

Replacing lines uses the list cursor and will move it.

Replacing lines with lines of a different type has undefined results, and may break in weird ways.

Delete line

Synopsis:

  • subtitles[i] = nil
  • subtitles.delete(i)
  • subtitles.delete(i1, i2, ...)
  • subtitles.delete({i1, i2, ...})
  • subtitles.deleterange(first, last)

Remove one or more from the subtitles file. All lines after the deleted line(s) will move up to fill the deleted indexes, so old indexes will no longer be valid.

The third syntax supports deleting multiple indexed lines in one call. The indexes given must all be correct for the subtitle file’s state before any lines are deleted.

The fourth syntax is identical to subtitles.delete(unpack(tbl)), but supports tables which are too large to unpack and will be slightly faster if you have the lines in a table anyway.

Trying to delete a nonexistent line is an error, except for with deleterange.

The fifth syntax deletes a range of lines, both indexed lines inclusive.

i (number)
Index of the line to delete.
first (number)
Index of the first line of the range to delete.
last (number)
Index of the last line of the range to delete.

Deleting lines uses the list cursor and will move it.

Creating an undo point

Synopsis: aegisub.set_undo_point(description)

You should always create an undo point at the end of any macro which made changes to the subtitles object. If you do not, one will automatically be set for you, but in future versions of Aegisub this may change to rolling back any changes made instead.

You can set multiple undo points in a single macro, but it is rarely a good idea to.

Only available in macro processing functions, as it doesn’t make sense anywhere else either.

description (string)
Text to appear in the Edit menu for the Undo and Redo items to describe the action that can be undone.

This is not really a function in the subtitles object, but it is still closely tied to it.

Line data tables

When you read lines from the subtitle file object they will always be one of a few classes of lines, and when you write lines back to the subtitle file they must also follow the format of one of those classes.

The line data objects are regular Lua tables with some specific fields defined.

Here’s a list of the different classes of lines:

info
A key/value pair in the Script Info section of the file
style
a regular style definition line
dialogue
A dialogue line, which may or may not be a comment. These are the lines you see in the grid in Aegisub.
unknown
An unknown kind of line.

There’s three fields that always exist in all line data tables:

class (string)
The name of the class of line this is, see the list above.
raw (string)
The raw text of the line, from first to last character on the physical line.
section (string)
Which section of the file the line belongs to. If the line is placed before the first section heading, this field is nil.

info class

This class defines two additional fields:

key (string)
The part of the line before the first colon, with leading and trailing spaces removed.
value (string)
Everything after the first colon on the line, also with leading and trailing spaces removed.

style class

This class defines a large number of additional fields. It’s usually processed by the karaskel and modified a bit by that. See the karaskel.lua section on style tables for more information about this class.

dialogue class

This class defines a large number of additional fields. It’s usually processed by the karaskel and has many calculated fields added by that. See the karaskel.lua section on dialogue line tables for more information on this class.

unknown class

No additional fields are defined by this class, due to its nature. This might be things like files embedded into the subtitles. You shouldn’t try to work with these lines unless you really know what you’re doing. Deleting, modifying and inserting unknown lines has undefined consequences. (That means, even if it works today it might not work tomorrow or in the next version of Aegisub.)

{::template name=“automation_navbox” /}